By Chuck Black – OMX Contributor
A $200K award made under the Canadian Space Agency‘s (CSA) Space Technology Development Program (STDP) on May 28th, 2015 to “test and optimize a novel nano-material that has equivalent or better performance than aluminum in mechanical strength and stiffness,” has highlighted the expertise of a small firm focused on the electroplating and electroforming of nanocrystalline metals.
CEO Gino Palumbo, relaxing at the Integran offices. The COLT carbon fibre hockey stick he’s holding is coated with a Nanovate™ nickel cobalt (NiCo) application, which makes the stick 50% stronger than an uncoated stick and guards against micro-fractures or catastrophic failure during use. The coating also provides 21% more load and release potential (POP) for the equivalent power, which makes slap shots both harder and faster. The hockey stick, built and sold independently using licensed Integran intellectual property, has been promoted in Dragon’s Den, Money Sense and on TSN. Photo c/o author.
All of which sounds pretty boring until you meet Gino Palumbo, the president and CEO of Integran Technologies and he slips into his story telling mode.
“We started out in the 1990’s as research group of what was then Ontario Hydro Technologies. Our job was to develop a way to remotely repair localized corrosion in steam generator (SG) tubing at the Pickering Nuclear Generating Station,” he said, during an interview at the Integran offices in May 2015.
A paper focused on the “ElectrosleeveTM Process for in-situ nuclear steam generator repair,” outlined the process which, from 1992 – 1994, was used to perform repairs at the Ontario Hydro Pickering Nuclear Generating Station unit 5 and eventually became the ElectrosleeveTM process. The full paper is available on the International Atomic Energy Association website at http://www.iaea.org/inis/collection/NCLCollectionStore/_Public/31/006/31006045.pdf.
The solution came through the use of electroplating to produce high strength nanocrystalline materials and eventually became the Electrosleeve™ process for nuclear steam generator repairs.
Shortly afterwards, Integran was spun out as a separate entity with its major shareholder being Ontario Power Generation and Babcock and Wilcox, which had been involved in the commercialization of the technology. In 2004, the company was restructured as part of a management employee buyout.
According to Palumbo, the real secret of what is now called the Nanovate™ process is that it doesn’t just repair objects; it can also make them stronger, using less material for a lower overall weight when compared to a more conventional materials.
The current technology uses nanocrystalline alloys of Nickel, Iron, Cobalt and Copper to coat parts made of plastic and carbon fiber in order to create high performance parts which are lighter, stronger, harder and cheaper than Aluminum; corrosion, waterproof and wear resistant; shielded against low frequency magnetic interference and even able to efficiently absorb energy and noise.
The company is also open to technology licensing for appropriate mass production opportunities and have already licensed to manufacturing partners in Canada, the United States, Mexico and China.
Integran COO Andrew Wang, R&D unit manager Brandon Bouwhuis, VP R&D Dr. Jon McCrea and CEO Gino Palumbo showcase a variety of parts created using the Nanovate™ process.
>>Follow OMX on Twitter to discover technologies making a difference in aerospace and defence. Converse and share ideas using #OMXtechtalk.